Toho-electronics TTM-339 Manual do Utilizador descarregar pdf (Página 21)

- 21 -

5.1 List of settings in the pattern No. setting and program setting modes

Name

Setting content

Initial value

SV *

Setting temperature (*1)

- (Termination of a run); SLL to SLH

W *

Wait function setting (*1)

0 to 4 (0 stands for no function)

TS1 *

Time signal 1 function setting (*1)

0 to 5 (0 stands for no function and 5 for in-a-selection step ON)

TS2 *

Time signal 2 function setting (*1)

0 to 5 (0 stands for no function and 5 for in-a-selection step ON)

TS3 *

Time signal 3 function setting (*1)

0 to 5 (0 stands for no function and 5 for in-a-selection step ON)

TS4 *

Time signal 4 function setting (*1)

0 to 5 (0 stands for no function and 5 for in-a-selection step ON)

ML *

Operation amount limiter function setting (*1)

0 to 4 (0 stands for no function)

T *

Setting time (*1)

0:00 to 99:59 (hour: minute); ~ (endless setting)

00:00

RNC

running times

0 - 99 times (0 for infinite number)

E ON

End signal ON time

0:00 to 99:59 (hour: minute); ~ (ON hold)

00:00

5.2 Common parameter setting mode SET 1

SET01

Name

Setting content

Initial value

PAT

Number-of-patterns setting (*2) (*3)

1 to 15 (pattern)

PVSV

PV start/SV start selection (*2)

PV start

SV start

SVSV

Start temperature setting at SV start (*2)

Thermocouple/RTD input SLL to SLH (C)

Current/voltage input SLL to SLH (digit)

RNES

In-a-run output/end signal output selection

(*2)

In-a-run output

End signal output

ERUN

External drive signal selection (*2)

OFF

Internal run

OFF

External run

TPV

Power outage restoration temperature width

setting

Thermocouple/RTD input 0.0 to 2999.9 (C) or 0 to 2999 (C)

Current/voltage input 0 to 29999 (digit)

5.3 Common parameter setting mode SET 2

SET02

Name

Setting content

Initial value

* Below, 1 and 2 are for the wait function setting, i.e., effective when 1 is selected.

WZ1

Wait zone 1 setting

Thermocouple/RTD input 0.0 to 999.9 (C) or 0 to 999 (C)

Current/voltage input 0 to 9999 (digit)

WT1

Wait time 1 setting

0:00 to 99:59 (hour: minute)

00:00

* Below, 3 and 4 are for the wait function setting, i.e., effective when 2 is selected.

WZ2

Wait zone 2 setting

same as Wait zone 1

WT2

Wait time 2 setting

00:00

* Below, 5 and 6 are for the wait function setting, i.e., effective when 3 is selected.

WZ3

Wait zone 3 setting

same as Wait zone 1

WZ3

Wait time 3 setting

00:00

* Below, 7 and 8 are for the wait function setting, i.e., effective when 4 is selected.

WZ4

Wait zone 4 setting

same as Wait zone 1

WT4

Wait time 4 setting

00:00

5.4 Common parameter setting mode SET 3

SET03

Name

Setting content

Initial value

* Below, 1 and 2 are for the time signal function setting, i.e., effective when 1 is selected.

ONT1

Time signal ON delay timer 1

0:00 to 99:59 (hours:minutes)

00:00

OFT1

Time signal OFF delay timer 1

0:00 to 99:59 (hours:minutes)

00:00

* Below, 3 and 4 are for the time signal function setting, i.e., effective when 2 is selected.

ONT2

Time signal ON delay timer 2

0:00 to 99:59 (hours:minutes)

00:00

OFT2

Time signal OFF delay timer 2

0:00 to 99:59 (hours:minutes)

00:00

* Below, 5 and 6 are for the time signal function setting, i.e., effective when 3 is selected.

ONT3

Time signal ON delay timer 3

0:00 to 99:59 (hours:minutes)

00:00

OFT3

Time signal OFF delay timer 3

0:00 to 99:59 (hours:minutes)

00:00

* Below, 7 and 8 are for the time signal function setting, i.e., effective when 4 is selected.

ONT4

Time signal ON delay timer 4

0:00 to 99:59 (hours:minutes)

00:00

OFT4

Time signal OFF delay timer 4

0:00 to 99:59 (hours:minutes)

00:00

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Comentários a estes Manuais

Sem comentários

Toho-electronics TTM-339 Manual do Utilizador Página 21

Comentários a estes Manuais

Manuais e produtos relacionados com Sensores Toho-electronics TTM-339